Safety during maintenance and operation of GCE

Safety during maintenance and operation of GCEPROHIBITED:

Unscrew the connecting lines under pressure.
Repairand dismantle the gas pressure regulator, evaporator and a gassolenoid valve in the presence of their gas.
Remove the gas cylinderin the presence of a liquefied gas or gas fumes.
Prolonged exposureto direct sunlight on the gas cylinder (not to keep open the trunk inthe sun).
To carry out welding and other work related to theevolution of a large amount of heat (drying a car in the dryingchamber, etc.).

CAUTION If you notice a strong smell of gas a drivermust:

Immediately stop, turn off the ignition, cut off both valveson the gas cylinder.
If possible, determine the visual point ofleakage (typical of frostbite, frost covering the leak).
After theelimination of leakage (when no longer smell the gas) the switchshould be put in the position of "Petrol", turn on the ignition,gasoline slipped up in the carburetor, start the engine and continueto move only on gasoline to help resolve the problem.Compliance withthese instructions will ensure safe operation of gas equipment.

Информация обновлена 08.02.2010 г.